Weather maps provide past, current, and future radar and satellite images for local, Canadian and other North American cities. Best Wi-Fi extenders of 2020: top devices for boosting your WiFi network. By Matt Hanson 22 September 2020. Get Wi-Fi in every room with the best Wi-Fi Extenders.
Whether it's a problem, or just a preventative measure, it's always a good idea to be aware of what devices are connecting to your network. Network Radar is an easy-to-use network discovering and managing tool for iPhone and iPad that allows you to get detailed information about the devices on your network.
Once Network Radar has scanned your network, it lists all found devices. Each devices comes with detailed information such as IP address, DNS names, mDNS name, open ports, response time and more. Of cause you can also create scans with custom IP ranges. Every scan can be accessed at a later time, even when your device is not connected to it anymore.
Perform useful network tools, such as Ping, Port Scan, Whois, DNS (lookup and reverse lookup). All of them can also be used on IP addresses or domains outside of your local network.
Network Radar is not limited to your local network. You can also set a custom start and end address to scan just parts of a every network that is reachable from your device.
With it's intuitive user interface Network Radar is easy to use on all your iOS devices. It is a modern app designed for iOS with a low surcharge on your network.
Did you know that Network Radar is also available for macOS? Check it out!
Once Network Radar has scanned your network, it lists all found devices. Each devices comes with detailed information such as IP address, DNS names, mDNS name, open ports, response time and more. Of cause you can also create scans with custom IP ranges. Every scan can be accessed at a later time, even when your device is not connected to it anymore.
Perform useful network tools, such as Ping, Port Scan, Whois, DNS (lookup and reverse lookup). All of them can also be used on IP addresses or domains outside of your local network.
Network Radar is not limited to your local network. You can also set a custom start and end address to scan just parts of a every network that is reachable from your device.
With it's intuitive user interface Network Radar is easy to use on all your iOS devices. It is a modern app designed for iOS with a low surcharge on your network.
Did you know that Network Radar is also available for macOS? Check it out!
Network Radar App Description & Info
The application Network Radar was published in the category Utilities on Mar 05, 2014 and was developed by Daniel Witt. The current version is 2.3. To download, install and use Network Radar, your iPhone, iPad, or iPod Touch will need to be on iOS 12.0 or higher that have at least 16 MB of free phone memory. We'd recommend you read the app's reviews before buying or downloading to see what other people say about this app.
Network Radar for iPhone 2.3 Release Notes
NEW: Network Radar now also checks the most popular ports with each refresh of a Scan.FIX: Ports that are being scanned were not visible in dark mode.FIX: Sometimes the DNS tool did accept invalid domains.FIX: There were some minor issues with the german localisation.
RADAR stands for Radio Detection and Ranging System. It is basically an electromagnetic system used to detect the location and distance of an object from the point where the RADAR is placed. It works by radiating energy into space and monitoring the echo or reflected signal from the objects. It operates in the UHF and microwave range.
A Basic Idea of RADAR
The RADAR system generally consists of a transmitter which produces an electromagnetic signal which is radiated into space by an antenna. When this signal strikes any object, it gets reflected or reradiated in many directions. This reflected or echo signal is received by the radar antenna which delivers it to the receiver, where it is processed to determine the geographical statistics of the object. The range is determined by the calculating the time taken by the signal to travel from the RADAR to the target and back. The target’s location is measured in angle, from the direction of maximum amplitude echo signal, the antenna points to. To measure range and location of moving objects, Doppler Effect is used.
A Basic RADAR System
Given below are 6 major parts of a RADAR System:
- A Transmitter: It can be a power amplifier like a Klystron, Travelling Wave Tube or a power Oscillator like a Magnetron. The signal is first generated using a waveform generator and then amplified in the power amplifier.
- Waveguides: The waveguides are transmission lines for transmission of the RADAR signals.
- Antenna: The antenna used can be a parabolic reflector, planar arrays or electronically steered phased arrays.
- Duplexer: A duplexer allows the antenna to be used as a transmitter or a receiver. It can be a gaseous device that would produce a short circuit at the input to the receiver when transmitter is working.
- Receiver: It can be super heterodyne receiver or any other receiver which consists of a processor to process the signal and detect it.
- Threshold Decision: The output of the receiver is compared with a threshold to detect the presence of any object. If the output is below any threshold, the presence of noise is assumed.
A Overview about the Pulsed RADAR
Pulsed RADAR sends high power and high frequency pulses towards the target object. It then waits for the echo signal from the object before another pulse is send. The range and resolution of the RADAR depends on the pulse repetition frequency. It uses the Doppler shift method.
The principle of RADAR detecting moving objects using the Doppler shift works on the fact that echo signals from stationary objects are in same phase and hence get cancelled while echo signals from moving object will have some changes in phase.
Two types of Pulsed RADAR are:
Pulse Doppler RADAR: It transmits high pulse repetition frequency to avoid Doppler ambiguities. The transmitted signal and the received echo signal are mixed in a detector to get the Doppler shift and the difference signal is filtered using a Doppler filter where the unwanted noise signals are rejected.
Moving Target Indicator RADAR: Privatus 6 1 1. It transmits low pulse repetition frequency to avoid range ambiguities. In a MTI RADAR system, the received echo signals from the object are directed towards the mixer, where they are mixed with the signal from a stable local oscillator (STALO) to produce the IF signal. This IF signal is amplified and then given to the phase detector where its phase is compared with the phase of the signal from the Coherent Oscillator (COHO) and the difference signal is produced. The Coherent signal has the same phase as the transmitter signal. The coherent signal and the STALO signal are mixed and given to the power amplifier which is switched on and off using the pulse modulator.
An Overview about the Continuous Wave RADAR
The continuous wave RADAR doesn’t measures the range of the target but rather the rate of change of range by measuring the Doppler shift of the return signal. In a CW RADAR electromagnetic radiation is emitted instead of pulses. It is basically used for speed measurement.
The RF signal and the IF signal are mixed in the mixer stage to generate the local oscillator frequency. The RF signal is the transmitted signal and the received signal by the RADAR antenna consists of the RF frequency plus the Doppler shift frequency. The received signal is mixed with the local oscillator frequency in the second mixture stage to generate the IF frequency signal. This signal is amplified and given to the third mixture stage where it is mixed with the IF signal to get the signal with Doppler frequency. This Doppler frequency or Doppler shift gives the rate of change of range of the target and thus the velocity of the target is measured.
RADAR Applications in 5 Areas:
Military Applications: Keep it 1 1 5.
The RADAR has 3 major applications in Military:
- In air defense it is used for target detection, target recognition and weapon control (directing the weapon to the tracked targets).
- In missile system to guide the weapon.
- Identifying enemy locations in map.
Air Traffic Control:
The RADAR has 3 major applications in Air Traffic control:
- To control air traffic near airports. The Air Surveillance RADAR is used to detect and display the aircraft’s position in the airport terminals.
- To guide the aircraft to land in bad weather using Precision Approach RADAR.
- To scan the airport surface for aircraft and ground vehicle positions
Remote Sensing: RADAR can be used for observing weather or observing planetary positions and monitoring sea ice to ensure smooth route for ships.
Ground Traffic Control: RADAR can also be used by traffic police to determine speed of the vehicle, controlling the movement of vehicles by giving warnings about presence of other vehicles or any other obstacles behind them.
Space:
RADAR has 3 major applications:
- To guide the space vehicle for safe landing on moon
- To observe the planetary systems
- To detect and track satellites
- To monitor the meteors
So, now I have given a basic understanding of RADAR, how about designing a simple project involving RADARΙ? Football manager 2019 buy.
Network Radar 2 2 24
Photo Credit
- Block Diagram Showing CW RADAR by Radartutorial
Network Radar 2 2 2 Player Games
Related Content